Chapter 6 Dashboard
ZyWALL USG Series User’s Guide
187
This table describes the fields in the above screen.
6.2.4 Number of Login Users Screen
Click the Number of Login Users link to see the following screen.
Figure 157 Dashboard > System Status > Number of Login Users
This table describes the fields in the above screen.
Table 25 Dashboard > System Status > DHCP Table
LABEL DESCRIPTION
# This field is a sequential value, and it is not associated with a specific entry.
Interface This field identifies the interface that assigned an IP address to a DHCP client.
IP Address This field displays the IP address currently assigned to a DHCP client or reserved for a
specific MAC address. Click the column’s heading cell to sort the table entries by IP
address. Click the heading cell again to reverse the sort order.
Host Name This field displays the name used to identify this device on the network (the
computer name). The Zyxel Device learns these from the DHCP client requests.
“None” shows here for a static DHCP entry.
MAC Address This field displays the MAC address to which the IP address is currently assigned or for
which the IP address is reserved. Click the column’s heading cell to sort the table
entries by MAC address. Click the heading cell again to reverse the sort order.
Description For a static DHCP entry, the host name or the description you configured shows
here. This field is blank for dynamic DHCP entries.
Reserve If this field is selected, this entry is a static DHCP entry. The IP address is reserved for
the MAC address.
If this field is clear, this entry is a dynamic DHCP entry. The IP address is assigned to a
DHCP client.
To create a static DHCP entry using an existing dynamic DHCP entry, select this field,
and then click Apply.
To remove a static DHCP entry, clear this field, and then click Apply.
Refresh Interval Select how often you want this window to be updated automatically.
Refresh Now Click this to update the information in the window right away.
Table 26 Dashboard > System Status > Number of Login Users
LABEL DESCRIPTION
# This field is a sequential value and is not associated with any entry.
User ID This field displays the user name of each user who is currently logged in to the Zyxel
Device.
Reauth/Lease Time This field displays the amount of reauthentication time remaining and the amount of
lease time remaining for each user.
Session Timeout This field displays the total account of time the account (authenticated by an
external server) can use to log into the UAG or access the Internet through the Zyxel
Device.
This shows unlimited for an administrator account.
To Next Page
Loading...
