Chapter 43 Object
ZyWALL USG Series User’s Guide
804
43.2.3.1 Group Add/Edit Screen
The Group Add/Edit screen allows you to create a new user group or edit an existing one. To access this
screen, go to the Group screen (see Section 43.2.3 on page 803), and click either the Add icon or an
Edit icon.
Figure 554 Configuration > Object > User/Group > Group > Add
The following table describes the labels in this screen.
43.2.4 User/Group Setting Screen
The Setting screen controls default settings, login settings, lockout settings, and other user settings for the
Zyxel Device. You can also use this screen to specify when users must log in to the Zyxel Device before it
routes traffic for them.
Member This field lists the members in the user group. Each member is separated by a comma.
Reference This displays the number of times an object reference is used in a profile.
Table 296 Configuration > Object > User/Group > Group (continued)
LABEL DESCRIPTION
Table 297 Configuration > Object > User/Group > Group > Add
LABEL DESCRIPTION
Name Type the name for this user group. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This value is case-
sensitive. User group names have to be different than user names.
Description Enter the description of the user group, if any. You can use up to 60 characters, punctuation
marks, and spaces.
Member List The Member list displays the names of the users and user groups that have been added to the
user group. The order of members is not important. Select users and groups from the Available
list that you want to be members of this group and move them to the Member list. You can
double-click a single entry to move it or use the [Shift] or [Ctrl] key to select multiple entries and
use the arrow button to move them.
Move any members you do not want included to the Available list.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.
To Next Page
Loading...
