Chapter 9 Wireless
ZyWALL USG Series User’s Guide
288
9.4 Rogue AP
Use this screen to assign APs either to the rogue AP list or the friendly AP list. A rogue AP is a wireless
access point operating in a network’s coverage area that is not under the control of the network
administrator, and which can potentially open up holes in a network’s security.
Click Configuration > Wireless > Rogue AP to access this screen.
Available Firmware This field displays if there is a later AP firmware version available on the firmware server. It
displays N/A if the Zyxel Device cannot connect with the firmware server. Check that the
Zyxel Device has Internet access if N/A displays and then click the Check button below.
If a newer Zyxel Device AP firmware is available, its version number and a More Details icon
displays here.
Check Click this button to have the Zyxel Device display the latest AP firmware version available on
the firmware server.
Last Check Success This displays the date and time the last check for new firmware was made and whether the
check is in progress (checking), was successful (success), or has failed (fail).
Apply AP Firmware Due to space limitations, the Zyxel Device only downloads and keeps AP firmware for APs it
is currently managing. If you connect a new AP to the Zyxel Device, the Zyxel Device may
need to download a new AP firmware. Please wait while downloading new firmware as the
speed depends on your Internet connection speed. Make sure to maintain the Internet
connection while downloading new firmware.
Apply Click this to download newer Available Firmware from the firmware server and update the
Runtime Firmware version.
# This is an index number of a managed AP.
Model This displays the name of all manageable AP models.
Runtime Firmware This displays the firmware version that the managed AP must have in order to be managed
by the Zyxel Device. Firmware for APs that the Zyxel Device already has displays in bold;
firmware that the Zyxel Device doesn’t have or is still downloading is grayed out. Firmware
that is in the download queue will show To be downloaded.
Refresh Click this to update the model firmware table.
Table 95 Configuration > Wireless > AP Management > Firmware (continued)
LABEL DESCRIPTION
To Next Page
Loading...
