ZyXEL Communications USG210 - LAG Add;Edit

Chapter 10 Interfaces
ZyWALL USG Series User’s Guide
384
10.11.2 LAG Add/Edit
This screen lets you configure Interface and LAG parameters for each LAG interface. To access this
screen, click the Add or Edit icon in the LAG screen. The following screen appears.
Figure 271 Configuration > Network > Interface > LAG > Add
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 126 Configuration > Network > Interface > LAG (continued)
LABEL DESCRIPTION