Chapter 43 Object
ZyWALL USG Series User’s Guide
870
3 Select Server Mode and select an authentication method object from the drop-down list box.
4 Click OK to save the settings.
Figure 605 Example: Using Authentication Method in VPN
43.11.3 Authentication Method Objects
Click Configuration > Object > Auth. Method to display the screen as shown.
Note: You can create up to 16 authentication method objects.
Figure 606 Configuration > Object > Auth. Method
The following table describes the labels in this screen.
43.11.3.1 Creating an Authentication Method Object
Follow the steps below to create an authentication method object.
1 Click Configuration > Object > Auth. Method.
Table 343 Configuration > Object > Auth. Method
LABEL DESCRIPTION
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove it
before doing so.
References Select an entry and click References to open a screen that shows which settings use the entry.
# This field displays the index number.
Method Name This field displays a descriptive name for identification purposes.
Method List This field displays the authentication method(s) for this entry.
To Next Page
Loading...
