Chapter 7 Monitor
ZyWALL USG Series User’s Guide
244
7.28 The IPSec Screen
You can use the IPSec Monitor screen to display and to manage active IPSec SAs. To access this screen,
click Monitor > VPN Monitor > IPSec. The following screen appears. Click a column’s heading cell to sort
the table entries by that column’s criteria. Click the heading cell again to reverse the sort order.
Figure 200 Monitor > VPN Monitor > IPSec
Each field is described in the following table.
Algorithm This displays the encryption, authentication algorithm, and key group the IPSec VPN
profile is using.
IKE Version This displays the IKE version the IPSec VPN profile is using.
Routing The fields below display static route related details on the Zyxel Device SecuDeployer
client.
# This displays the Zyxel Device SecuDeployer client static route entry number.
Name This displays the Zyxel Device SecuDeployer client static route entry name.
Type This displays the type of the route (Static Route).
Traffic Direction This displays the direction of traffic packets for which the route applies: Server to Client or
Client to Server.
Destination This displays the destination IP address and the subnet mask of the route.
Next-hop This displays the next-hop gateway or the interface through which the traffic is routed.
Close Click this to close this screen.
Table 71 Monitor > Cloud CNM > SecuDeployer > Device Information (ZyXEL device in Client Role)
LABEL DESCRIPTION
Table 72 Monitor > VPN Monitor > IPSec
LABEL DESCRIPTION
Name Type the name of a IPSec SA here and click Search to find it (if it is associated). You
can use a keyword or regular expression. Use up to 30 alphanumeric and _+-
.()!$*^:?|{}[]<>/ characters. See Section on page 245 for more details.
Policy Type the IP address(es) or names of the local and remote policies for an IPSec SA
and click Search to find it. You can use a keyword or regular expression. Use up to 30
alphanumeric and _+-.()!$*^:?|{}[]<>/ characters. See Section on page 245 for
more details.
Search Click this button to search for an IPSec SA that matches the information you
specified above.
Disconnect Select an IPSec SA and click this button to disconnect it.
To Next Page
Loading...
