ZyXEL Communications USG210 - PPP Interface Add or Edit

Chapter 10 Interfaces
ZyWALL USG Series User’s Guide
333
10.6.2 PPP Interface Add or Edit
Note: You have to set up an ISP account before you create a PPPoE/PPTP/L2TP interface.
This screen lets you configure a PPPoE or PPTP or L2TP interface. If you enabled IPv6 in the Configuration
> System > IPv6 screen, you can also configure PPP interfaces used for your IPv6 networks on this screen.
To access this screen, click the Add icon or an Edit icon in the PPP Interface screen.
Account Profile This field displays the ISP account used by this PPPoE/PPTP interface.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 112 Configuration > Network > Interface > PPP (continued)
LABEL DESCRIPTION