Chapter 45 Log and Report
ZyWALL USG Series User’s Guide
966
45.3 Log Setting Screens
The Log Setting screens control log messages and alerts. A log message stores the information for
viewing or regular e-mailing later, and an alert is e-mailed immediately. Usually, alerts are used for
events that require more serious attention, such as system errors and attacks.
The Zyxel Device provides a system log and supports e-mail profiles and remote syslog servers. View the
system log in the MONITOR > Log screen. Use the e-mail profiles to mail log messages to the specific
destinations. You can also have the Zyxel Device store system logs on a connected USB storage device.
The other four logs are stored on specified syslog servers.
The Log Setting screens control what information the Zyxel Device saves in each log. You can also
specify which log messages to e-mail for the system log, and where and how often to e-mail them.
These screens also set for which events to generate alerts and where to email the alerts.
The first Log Setting screen provides a settings summary. Use the Edit screens to configure settings such as
log categories, e-mail addresses, and server names for any log. Use the Log Category Settings screen to
edit what information is included in the system log, USB storage, e-mail profiles, and remote servers.
45.3.1 Log Setting Summary
To access this screen, click Configuration > Log & Report > Log Setting.
Reset All Counters Click this to discard all report data and start all of the counters over at zero.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 392 Configuration > Log & Report > Email Daily Report (continued)
LABEL DESCRIPTION
To Next Page
Loading...
