Chapter 31 SSL VPN
ZyWALL USG Series User’s Guide
646
31.3 The SSL Global Setting Screen
Click VPN > SSL VPN and click the Global Setting tab to display the following screen. Use this screen to
set the IP address of the Zyxel Device (or a gateway device) on your network for full tunnel mode
access, enter access messages or upload a custom logo to be displayed on the remote user screen.
Figure 448 VPN > SSL VPN > Global Setting
The following table describes the labels in this screen.
Network List To allow user access to local network(s), select a network name in the Selectable Address
Objects list and click the right arrow button to add to the Selected Address Objects list. You
can select more than one network.
To block access to a network, select the network name in the Selected Address Objects list
and click the left arrow button.
OK Click OK to save the changes and return to the main Access Privilege screen.
Cancel Click Cancel to discard all changes and return to the main Access Privilege screen.
Table 231 VPN > SSL VPN > Access Privilege > Add/Edit (continued)
LABEL DESCRIPTION
Table 232 VPN > SSL VPN > Global Setting
LABEL DESCRIPTION
Global Setting
Network Extension
Local IP
Specify the IP address of the Zyxel Device (or a gateway device) for full tunnel mode SSL VPN
access.
Leave this field to the default settings unless it conflicts with another interface.
To Next Page
Loading...
