Chapter 7 Monitor
ZyWALL USG Series User’s Guide
246
• Log out individual users and delete related session information.
Once a user logs out, the corresponding entry is removed from the screen.
Figure 201 Monitor > VPN Monitor > SSL
The following table describes the labels in this screen.
7.30 The L2TP over IPSec Screen
Click Monitor > VPN Monitor > L2TP over IPSec to open the following screen. Use this screen to display
and manage the Zyxel Device’s connected L2TP VPN sessions.
Figure 202 Monitor > VPN Monitor > L2TP over IPSec
Table 73 Monitor > VPN Monitor > SSL
LABEL DESCRIPTION
Disconnect Select a connection and click this button to terminate the user’s connection and delete
corresponding session information from the Zyxel Device.
Refresh Click Refresh to update this screen.
# This field is a sequential value, and it is not associated with a specific SSL.
User This field displays the account user name used to establish this SSL VPN connection.
Access This field displays the name of the SSL VPN application the user is accessing.
Login Address This field displays the IP address the user used to establish this SSL VPN connection.
Connected Time This field displays the time this connection was established.
Inbound (Bytes) This field displays the number of bytes received by the Zyxel Device on this connection.
Outbound (Bytes) This field displays the number of bytes transmitted by the Zyxel Device on this
connection.
To Next Page
Loading...
