Chapter 44 System
ZyWALL USG Series User’s Guide
956
44.14 Notification > SMS
The Zyxel Device supports Short Message Service (SMS) to send short text messages to mobile phone
devices. At the time of writing, the Zyxel Device uses ViaNett as the SMS gateway to help forward SMS
messages. You must already have a ViaNett account in order to use the SMS service.
Click Configuration > System > System > Notification > SMS to open the following screen.
Configure the settings according to your SMS service provider’s format. Different SMS service providers
may have different format.
Figure 681 Configuration > System > Notification > SMS
The following table describes the labels in this screen.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 385 Configuration > System > Notification > Mail Server (continued)
LABEL DESCRIPTION
Table 386 Configuration > System > Notification > SMS
LABEL DESCRIPTION
General Settings
Enable SMS Select the check box to turn on the SMS service.
Default country
code for phone
number
Enter the default country code for the mobile phone number to which you want to send SMS
messages.
SMS Provider Select ViaNett if you use ViaNett to help forward SMS messages.
Select Email-to-SMS Provider if you use another SMS gateway to help forward SMS messages.
These fields are available when the SMS Provider is Email-to-SMS Provider.
Note: Go to the Configuration > System > Notification > Mail Server screen to configure a mail server
first, so the Zyxel Device can send SMS messages to the SMS service provider via emails. Thus, the
SMS service provider will send the SMS messages.
To Next Page
Loading...
