Chapter 7 Monitor
ZyWALL USG Series User’s Guide
258
7.36 The SSL Inspection Screens
The Zyxel Device uses SSL Inspection to decrypt SSL traffic, sends it to the UTM engines for inspection,
then encrypts traffic that passes inspection and forwards it. You must enable SSL Inspection if you want
to use Content Filtering 2.0 Safe Search.
Click Monitor > UTM Statistics > SSL Inspection > Summary to display the following screen.
Figure 215 Monitor > UTM Statistics > SSL Inspection > Summaryt
The following table describes the labels in this screen.
Avg. Response Time (sec) This is the average for how long it takes to receive a reply from this DNSBL.
No Response This is how many DNS queries the Zyxel Device sent to this DNSBL without receiving a
reply.
Table 80 Monitor > UTM Statistics > Anti-Spam > Status (continued)
LABEL DESCRIPTION
Table 81 Monitor > UTM Statistics > SSL Inspection > Summary
LABEL DESCRIPTION
Collect Statistics Select this check box to have the Zyxel Device collect SSL Inspection statistics.
The collection starting time displays after you click Apply. All of the statistics in this
screen are for the time period starting at the time displayed here. The format is year,
month, day and hour, minute, second. All of the statistics are erased if you restart the
Zyxel Device or click Flush Data. Collecting starts over and a new collection start time
displays.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Refresh Click this button to update the report display.
Flush Data Click this button to discard all of the screen’s statistics and update the report display.
Status
To Next Page
Loading...
