Chapter 31 SSL VPN
ZyWALL USG Series User’s Guide
649
The following table describes the labels in this screen.
31.4.1 Example: Configure Zyxel Device for SecuExtender
Make these configurations on the Zyxel Device to allow the remote user to access resources behind the
Zyxel Device using SecuExtender. These steps can be performed in any order.
1 Create a user that can log into the Zyxel Device. Using the Zyxel Device web configurator, go to
Configuration > Object > User > Add and substitute your information for the information shown in the
following example.
Figure 451 Create a User
2 Next create an SSL VPN Access Privilege policy substituting your information for the information shown in
the following example. Using the Zyxel Device web configurator, go to Configuration > VPN > SSL VPN >
Access Privilege > Add.
Table 233 Configuration > VPN > SSL VPN > SecuExtender
LABEL DESCRIPTION
Latest Version This displays the latest version of the Zyxel Device Security SecuExtender that is
available.
Current Version This displays the current version of SecuExtender that is installed in the Zyxel Device.
Note: You need to register first at portal.myZyxel.com to download the latest version of
SecuExtender.
Update Now The Zyxel Device periodically checks if there’s a later version of SecuExtender at the
portal. The Update Now button is enabled when there is.Click Update Now to get the
latest version of SecuExtender.
To Next Page
Loading...
