Chapter 43 Object
ZyWALL USG Series User’s Guide
860
Figure 597 Configuration > Schedule > Schedule Group > Add
The following table describes the fields in the above screen.
43.10 AAA Server Overview
You can use a AAA (Authentication, Authorization, Accounting) server to provide access control to your
network. The AAA server can be a Active Directory, LDAP, or RADIUS server. Use the AAA Server screens
to create and manage objects that contain settings for using AAA servers. You use AAA server objects in
Table 338 Configuration > Schedule > Schedule Group > Add
LABEL DESCRIPTION
Group Members
Name Type the name used to refer to the recurring schedule. You may use 1-31
alphanumeric characters, underscores(
_), or dashes (-), but the first character
cannot be a number. This value is case-sensitive.
Description Enter a description of the service group, if any. You can use up to 60 printable ASCII
characters.
Member List
The Member list displays the names of the service and service group objects that
have been added to the service group. The order of members is not important.
Select items from the Available list that you want to be members and move them to
the Member list. You can double-click a single entry to move it or use the [Shift] or
[Ctrl] key to select multiple entries and use the arrow button to move them.
Move any members you do not want included to the Available list.
OK
Click OK to save your changes back to the Zyxel Device.
Cancel
Click Cancel to exit this screen without saving your changes.
To Next Page
Loading...
