Chapter 36 Application Patrol
ZyWALL USG Series User’s Guide
693
36.2.2 The Application Patrol Profile Rule Add Application Screen
Click Add or Edit under Profile Management in the previous screen to display the following screen.
Figure 494 Configuration > UTM Profile > App Patrol > Profile > Profile Management > Add/Edit
The following table describes the labels in this screen.
Profile Management
Add Click this to create a new entry. Select an entry and click Add to create a new entry after
the selected entry.
Remove Select an entry and click Remove to delete the selected entry.
# This field is a sequential value showing the number of the profile. The profile order is not
important.
Application This field displays the application name of the policy.
Action Select the default action for all signatures in this category.
forward - the Zyxel Device routes packets that matches these signatures.
drop - the Zyxel Device silently drops packets that matches these signatures without
notification.
reject - the Zyxel Device drops packets that matches these signatures and sends
notification.
Log Select whether to have the Zyxel Device generate a log (log), log and alert (log alert) or
neither (no) by default when traffic matches a signature in this category.
OK A profile consists of separate category editing screens. If you want to configure just one
category for a profile, click OK to save your settings to the Zyxel Device, complete the
profile and return to the profile summary page.
Cancel Click Cancel to return to the profile summary page without saving any changes.
Table 250 Configuration > UTM Profile > App Patrol > Profile > Add/Edit (continued)
LABEL DESCRIPTION
Table 251 Configuration > UTM Profile > App Patrol > Profile > Profile Management > Add/Edit
LABEL DESCRIPTION
General Settings
Application Select an application to apply the policy.
To Next Page
Loading...
