Chapter 1 Introduction
ZyWALL USG Series User’s Guide
44
Configuration Menu
Use the configuration menu screens to configure the Zyxel Device’s features.
Log View Log Lists log entries.
View AP Log Lists AP log entries.
Dynamic
Users Log
Display the Zyxel Device’s dynamic guest account log messages.
Table 7 Configuration Menu Screens Summary
FOLDER OR LINK TAB FUNCTION
Quick Setup Quickly configure WAN interfaces or VPN connections.
Licensing
Registration Registration Register the device and activate trial services.
Service View the licensed service status and upgrade licensed services.
Signature
Update
Anti-Virus Update anti-virus signatures immediately or by a schedule.
IDP/AppPatrol Update IDP signatures immediately or by a schedule.
Wireless
Controller Configuration Configure manual or automatic controller registration.
AP
Management
Mgnt AP List Edit or remove entries in the lists of APs managed by the Zyxel Device.
AP Policy Configure the AP controller’s IP address on the managed APs and
determine the action the managed APs take if the current AP
controller fails.
AP Group Create groups of APs, define their radio, VLAN, port and load
balancing settings.
Firmware Update the firmware on APs connected to your Zyxel Device.
Rogue AP Rogue/Friendly AP
List
Configure how the Zyxel Device monitors rogue APs.
Load Balancing Load Balancing Configure load balancing for traffic moving to and from wireless
clients.
DCS DCS Configure dynamic wireless channel selection.
Auto Healing Auto Healing Enable auto healing to extend the wireless service coverage area of
the managed APs when one of the APs fails.
RTLS Real Time Location
System
Use the managed APs as part of an Ekahau RTLS to track the location
of Ekahau Wi-Fi tags.
Network
Table 6 Monitor Menu Screens Summary (continued)
FOLDER OR LINK TAB FUNCTION
To Next Page
Loading...
