Chapter 20 Web Authentication
ZyWALL USG Series User’s Guide
503
Add/Edit an Authentication Type Profile
Click the Add icon or select an entry in the Web Authentication > Authentication Type screen and click
the Edit icon to display the screen. The screen differs depending on what you select in the Type field.
Figure 365 Configuration > Web Authentication > Authentication Type: Add/Edit (Web Portal)
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
# This field is a sequential value, and it is not associated with a specific entry.
Name This field displays the name of the profile.
default-web-portal: the default login page built into the Zyxel Device.
Note: You can also customize the default login page built into the Zyxel Device in
the System > WWW > Login Page screen.
default-web-portal: the default user agreement page built into the Zyxel Device.
Type This field displays the type of the web authentication page used by this profile.
Web Page This field displays whether this profile uses the default web authentication page built into the
Zyxel Device (System Default Page) or custom web authentication pages from an external web
server (External Page).
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
Table 172 Configuration > Web Authentication > Authentication Type (continued)
LABEL DESCRIPTION
To Next Page
Loading...
