Chapter 40 Anti-Spam
ZyWALL USG Series User’s Guide
759
Figure 522 Configuration > UTM Profile > Anti-Spam > Black/White List > Black List
The following table describes the labels in this screen.
Table 278 Configuration > UTM Profile > Anti-Spam > Black/White List > Black List
LABEL DESCRIPTION
General Settings
Enable Black List
Checking
Select this check box to have the Zyxel Device treat e-mail that matches (an active)
black list entry as spam.
Black List Spam Tag Enter a message or label (up to 15 ASCII characters) to add to the mail subject of e-mails
that match the Zyxel Device’s spam black list.
Black List X-Header Specify the name and value for the X-Header to be added to e-mails that match the
Zyxel Device’s spam black list.
Rule Summary
Add Click this to create a new entry.
Edit Select an entry and click this to be able to modify it.
Remove Select an entry and click this to delete it.
Activate To turn on an entry, select it and click Activate.
Inactivate To turn off an entry, select it and click Inactivate.
Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
# This is the entry’s index number in the list.
Type This field displays whether the entry is based on the e-mail’s subject, source or relay IP
address, source e-mail address, or header.
Content This field displays the subject content, source or relay IP address, source e-mail address, or
header value for which the entry checks.
Apply Click Apply to save your changes back to the Zyxel Device.
Reset Click Reset to return the screen to its last-saved settings.
To Next Page
Loading...
