Chapter 43 Object
ZyWALL USG Series User’s Guide
808
The following table describes the labels in this screen.
43.2.4.2 User Aware Login Example
Access users cannot use the Web Configurator to browse the configuration of the Zyxel Device. Instead,
after access users log into the Zyxel Device, the following screen appears.
Figure 557 Web Configurator for Non-Admin Users
Table 299 Configuration > Object > User/Group > Setting > Edit
LABEL DESCRIPTION
User Type This read-only field identifies the type of user account for which you are configuring the
default settings.
• admin - this user can look at and change the configuration of the Zyxel Device
• limited-admin - this user can look at the configuration of the Zyxel Device but not to
change it.
• dynamic-guest - this user has access to the Zyxel Device’s services but cannot look at
the configuration.
• user - this user has access to the Zyxel Device’s services but cannot look at the
configuration.
• guest - this user has access to the
Zyxel Device’s services but cannot look at the
configuration.
• ext-user - this user account is maintained in a remote server, such as RADIUS or LDAP.
See Ext-User Accounts on page 798 for more information about this type.
• ext-group-user - this user account is maintained in a remote server, such as RADIUS or
LDAP. See Ext-Group-User Accounts on page 798 for more information about this type.
• guest-manager - this user can log in via the web configurator login screen and create
dynamic guest accounts using the Account Generator screen that pops up. See Section
21.4.1 on page 526 for detailed information about the Account Generator screen.
Lease Time Enter the number of minutes this type of user account has to renew the current session
before the user is logged out. You can specify 1 to 1440 minutes. You can enter 0 to make
the number of minutes unlimited.
Admin users renew the session every time the main screen refreshes in the Web
Configurator. Access users can renew the session by clicking the Renew button on their
screen. If you allow access users to renew time automatically (see Section 43.2.4 on page
804), the users can select this check box on their screen as well. In this case, the session is
automatically renewed before the lease time expires.
Reauthentication
Time
Type the number of minutes this type of user account can be logged into the Zyxel Device in
one session before the user has to log in again. You can specify 1 to 1440 minutes. You can
enter 0 to make the number of minutes unlimited. Unlike Lease Time, the user has no
opportunity to renew the session without logging out.
OK Click OK to save your changes back to the Zyxel Device.
Cancel Click Cancel to exit this screen without saving your changes.
To Next Page
Loading...
