Chapter 43 Object
ZyWALL USG Series User’s Guide
840
43.6.2.1 Add Application Group Rule
Click Add in Configuration > Object > Application > Application Group to select already created
application rules and combine them as a single new rule.
Figure 581 Configuration > Object > Application > Application > Add Application Group Rule
The following table describes the labels in this screen.
Name This field indicates the name assigned to the application group.
Description You may type some extra information on the application group here.
Member This field shows the application objects in this application group.
Reference This displays the number of times an object reference is used in a profile.
License You need to buy a license or use a trial license in order to use IDP/AppPatrol signatures. These
fields show license-related information.
License Status This field shows whether you have activated an IDP/AppPatrol signatures license
License Type This field shows the type of IDP/AppPatrol signatures license you have activated
Signature
Information
An activated license allows you to download signatures to the Zyxel Device from myZyxel.
These fields show details on the signatures downloaded.
Current
Version
The version number increments when signatures are updated at myZyxel. This field shows the
current version downloaded to the Zyxel Device.
Released
Date
This field shows the date (YYYY-MM-DD) and time the current signature version was released.
Update
Signatures
If your signature set is not the most recent, click this to go to Configuration > Licensing >
Signature Update > IDP / AppPatrol to update your signatures.
Table 320 Configuration > Object > Application > Application Group (continued)
LABEL DESCRIPTION
Table 321 Configuration > Object > Application > Application > Add Application Group Rule
LABEL DESCRIPTION
Name Enter a name for the group. You may use 1-31 alphanumeric characters, underscores(_), or
dashes (-), but the first character cannot be a number. This value is case-sensitive.
Description This field displays the description of each group, if any. You can use up to 60 characters,
punctuation marks, and spaces.
To Next Page
Loading...
