Chapter 43 Object
ZyWALL USG Series User’s Guide
903
Figure 629 Configuration > Object > DHCPv6 > Request
The following table describes the labels in this screen.
43.15.1.1 DHCPv6 Request Add/Edit Screen
The Request Add/Edit screen allows you to create a new request object or edit an existing one.
To access this screen, go to the Request screen (see Section 43.15.1 on page 902), and click either the
Add icon or an Edit icon.
Figure 630 Configuration > DHCPv6 > Request > Add
The following table describes the labels in this screen.
Table 358 Configuration > Object > DHCPv6 > Request
LABEL DESCRIPTION
Configuration
Add Click this to create a new entry.
Edit Double-click an entry or select it and click Edit to open a screen where you can modify the
entry’s settings.
Remove To remove an entry, select it and click Remove. The Zyxel Device confirms you want to remove
it before doing so.
References Select an entry and click References to open a screen that shows which settings use the entry.
# This field is a sequential value, and it is not associated with a specific object.
Name This field displays the name of each request object.
Type This field displays the request type of each request object.
Interface This field displays the interface used for each request object.
Value This field displays the value for each request object.
Table 359 Configuration > DHCPv6 > Request > Add
LABEL DESCRIPTION
Name Type the name for this request object. You may use 1-31 alphanumeric characters,
underscores(
_), or dashes (-), but the first character cannot be a number. This value is case-
sensitive.
Request Type Select the request type for this request object. You can choose from Prefix Delegation, DNS
Server, NTP Server, or SIP Server.
To Next Page
Loading...
