Chapter 8 Home Networking
VMG1312-B Series User’s Guide
142
3 Click Apply t o save your set t ings.
Figure 51 Net work Sett ing > Hom e Networking > LAN Set up
The following t able describes t he fields in t his screen.
Table 30 Network Sett ing > Hom e Net working > LAN Setup
LABEL DESCRIPTION
I nt erface Group
Group Nam e Select t he int erface group nam e for which you want t o configure LAN set t ings. See
Chapt er
13 on page 205
for how t o creat e a new int erface group.
LAN I P Set up
I P Addr ess Ent er the LAN I P address you want to assign to your Device in dot t ed decim al notation, for
exam ple, 192.168.1.1 ( factory default ) .
Subnet Mask Type the subnet m ask of your net w ork in dotted decim al notation, for exam ple
255.255.255.0 ( fact ory default) . Your Device aut om atically com putes t he subnet m ask
based on t he I P Address you ent er, so do not change t his field unless you are inst ructed to
do so.
I GMP Snooping
St atus Select t he Enable I GM P Snooping checkbox t o allows t he Device t o passively learn
m ult icast group.
I GMP Mode Select St a nda rd Mode t o have t he Device forward m ult icast packet s to a port t hat joins t he
m ult icast group and broadcast unknown m ulticast packet s from the WAN to all LAN port s.
Select Blocking Mode to have the Device block all unknown m ult icast packet s from the
WAN.
DHCP Ser ver State
DHCP Select Enable t o have the Device act as a DHCP server or DHCP relay agent.
Select Disa ble t o stop t he DHCP server on t he Device.
Select DHCP Relay t o have t he Device forward DHCP request to t he DHCP server.
To Next Page
Loading...
