Chapter 4 Tutorials
VMG/XMG Series User’s Guide
100
Tutorial: Advanced > QoS
2 Click Network > Queue Setup > Add new Queue to create a new queue. In the screen that opens, click
the Active field to enable. When the switch goes to the right ( ), the function is enabled. Enter or
select the following values:
• Name: Email
• Interface: WAN
• Priority: 1 (High)
• Weight: 8
• Rate Limit: 5,000 (kbps)
Tutorial: Advanced > QoS > Queue Setup
3 Click Network > QoS > Classification Setup > Add new Classification to create a new class. Select Enable
in the Active field and follow the settings as shown in the screen below.
To Next Page
Loading...
