Chapter 9 Routing
VMG/XMG Series User’s Guide
206
9.3 The DNS Route Screen
Use this screen to view and configure DNS routes on the Zyxel Device. A DNS route entry defines a policy
for the Zyxel Device to forward a particular DNS query to a specific WAN interface.
Note: A maximum of 20 entries can be added.
Click Network Setting > Routing > DNS Route to open the following screen.
Figure 124 Network Setting > Routing > DNS Route
The following table describes the labels in this screen.
9.3.1 The DNS Route Add Screen
You can manually add the Zyxel Device’s DNS route entry. Click Add New DNS Route in the Network
Setting > Routing > DNS Route screen. The screen shown next appears.
Table 62 Network Setting > Routing > DNS Route
LABEL DESCRIPTION
Add New DNS
Route
Click this to add a new DNS route.
# This is the index number of a DNS route.
Status This field displays whether the DNS route is active or not. A yellow bulb signifies that this DNS route
is active. A gray bulb signifies that this DNS route is not active.
Domain Name This is the host name or domain name of the DNS route entry.
WAN Interface This is the WAN connection through which the Zyxel Device forwards DNS requests for this
domain name.
Subnet Mask This is the subnet mask of the DNS route entry.
Modify Click the Edit icon to modify the DNS route.
Click the Delete icon to delete the DNS route.
To Next Page
Loading...
