Chapter 31 WLAN Station Status
VMG/XMG Series User’s Guide
346
CHAPTER 31
WLAN Station Status
31.1 WLAN Station Status Overview
Click System Monitor > WLAN Station Status to open the following screen. Use this screen to view
information and status of the wireless stations (wireless clients) that are currently associated with the
Zyxel Device. Being associated means that a wireless client (for example, your network or computer with
a wireless network card) has connected successfully to the AP (or wireless router) using the same SSID,
channel, and security settings.
Figure 220 System Monitor > WLAN Station Status
The following table describes the labels in this screen.
Table 148 System Monitor > WLAN Station Status
LABEL DESCRIPTION
# This is the index number of an associated wireless station.
MAC Address This field displays the MAC address of an associated wireless station.
Rate (Mbps) This field displays the transmission rate of the wireless LAN traffic between an associated wireless
station and an AP.
RSSI (dBm) This field displays the strength of the wireless LAN signal between an associated wireless station
and an AP.
The normal range is -30dBm to -79dBm. If the value drops below -80dBm, try moving the
associated wireless station closer to the Zyxel Device to get better signal strength.
To Next Page
Loading...
