Chapter 3 Quick Start
VMG/XMG Series User’s Guide
72
3.4.6 Internet Information Input
Enter your Internet connection information if you select PPPoE as the encapsulation method. Click Next.
Figure 55 Wizard - Internet Connection Information
3.5 Quick Start Setup-Wireless
Turn the wireless LAN on or off. If you keep it on, record the security settings so you can configure your
wireless clients to connect to the Zyxel Device.
Click the Keep 2.4G and 5G the same check box to use the same SSID for 2.4GHz and 5GHz wireless
networks. Otherwise, deselect the check box to have two different SSIDs for 2.4GHz and 5GHz wireless
networks. The screen and fields to enter may vary when you select or deselect the check box. Note that
you have to disable Zyxel MESH in the Network > Wireless > MESH screen to deselect the Keep 2.4G and
5G the same check box.
Click Done.
Figure 56 Wizard - Wireless
To Next Page
Loading...
