EasyManua.ls Logo

ZyXEL Communications VMG3925-B10C - Configuring the Wireless Network Settings; Setting up a Secure Wireless Network

ZyXEL Communications VMG3925-B10C
434 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 Tutorials
VMG/XMG Series User’s Guide
77
Try to connect to a website to see if you have correctly set up your Internet connection. Be sure to
contact your service provider for any information you need to configure the WAN screens.
4.3 Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to access the Internet. In this
wireless network, the Zyxel Device serves as an access point (AP), and the notebook is the wireless client.
The wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the Zyxel Device. Then he can set up a wireless
network using WPS (Section 4.3.2 on page 80) or manual configuration (Section 4.3.3 on page 84).
4.3.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a wireless network.
DSL
SSID Example
Security Mode WPA2-PSK
Pre-Shared Key DoNotStealMyWirelessNetwork
802.11 Mode 802.11b/g/n Mixed

Table of Contents

Other manuals for ZyXEL Communications VMG3925-B10C

Related product manuals