VMG/XMG Series User’s Guide
330
CHAPTER 25
Traffic Status
25.1 Traffic Status Overview
Use the Traffic Status screens to look at the network traffic status and statistics of the WAN/LAN interfaces
and NAT.
25.1.1 What You Can Do in this Chapter
• Use the WAN screen to view the WAN traffic statistics (Section 25.2 on page 330).
• Use the LAN screen to view the LAN traffic statistics (Section 25.3 on page 331).
• Use the NAT screen to view the NAT status of the Zyxel Device’s client(s) (Section 25.4 on page 332).
25.2 The WAN Status Screen
Click System Monitor > Traffic Status to open the WAN screen. The figures in this screen show the number
of bytes received and sent through the Zyxel Device’s WAN interface. Packet statistics for each WAN
interface are listed in the tables below.
Figure 211 System Monitor > Traffic Status > WAN
To Next Page
Loading...
