Chapter 7 Wireless
VMG/XMG Series User’s Guide
160
7.5 The WPS Screen
WiFi Protected Setup (WPS) allows you to quickly set up a wireless network with strong security, without
having to configure security settings manually. Select one of the WPS methods and follow the
instructions to establish a WPS connection. Your device must support WPS to use this feature. We
recommend using the Push Button Configuration (PBC) if your device supports it. See Section 7.11.8.3 on
page 178 for more information about WPS.
Note: The Zyxel Device applies the security settings of the main SSID (SSID1) profile to the WPS
wireless connection (see Section 7.2 on page 149). If you want to use the WPS feature,
make sure you have set the security mode of SSID1 to WPA2-PSK or No Security.
Note: If WPS is enabled, UPnP will automatically be turned on.
Note: The WPS switch is grayed out when wireless LAN is disabled.
Click Network Setting > Wireless > WPS. The following screen displays. Click this switch and makes it turn
blue. Click Apply to activate the WPS function. Then you can configure the WPS settings in this screen.
To Next Page
Loading...
