Chapter 15 Interface Grouping
VMG/XMG Series User’s Guide
260
15.2.1 Interface Group Configuration
Click the Add New Interface Group button in the Interface Grouping screen to open the following
screen. Use this screen to create a new interface group. If you want to automatically add LAN clients to
a WAN interface in the new group, use filtering criteria. By configuring this, any DHCP client request with
the specified vendor ID (DHCP option 60) will be denied an IP address from the local DHCP server.
Note: An interface can belong to only one group at a time.
Note: After configuring a vendor ID, reboot the client device attached to the Zyxel Device to
obtain an appropriate IP address.
Note: You can have up to 15 filter criteria.
Figure 162 Interface Group Configuration
To Next Page
Loading...
