Chapter 15 Interface Grouping
VMG/XMG Series User’s Guide
259
Figure 160 Interface Grouping Application
You can use this screen to create new user-defined interface groups or modify existing ones. Interfaces
that do not belong to any user-defined group always belong to the default group.
Click Network Setting > Interface Grouping to open the following screen.
Figure 161 Network Setting > Interface Grouping
The following table describes the fields in this screen.
Table 95 Network Setting > Interface Grouping
LABEL DESCRIPTION
Add New
Interface Group
Click this button to create a new interface group.
Group Name This shows the descriptive name of the group.
WAN Interface This shows the WAN interfaces in the group.
LAN Interfaces This shows the LAN interfaces in the group.
Criteria This shows the filtering criteria for the group.
Modify Click the Edit icon to modify an existing Interface group setting or click the Delete icon to
remove the Interface group.
Add Click this button to create a new group.
To Next Page
Loading...
