Chapter 16 USB Service
VMG/XMG Series User’s Guide
268
To change your Zyxel Device’s media server settings, click Network Setting > USB Service > Media Server.
The screen appears as shown.
Figure 167 Network Setting > USB Service > Media Server
The following table describes the labels in this menu.
Table 100 Network Setting > USB Service > Media Server
LABEL DESCRIPTION
Media Server Click this switch to have the Zyxel Device function as a DLNA-compliant media server. When the
switch goes to the right , the function is enabled. Otherwise, it’s not.
Enable the media server to let (DLNA-compliant) media clients on your network play media files
located in the shares.
Interface Select an interface on which you want to enable the media server function. An interface can
be added or modified in Network Setting > Interface Grouping.
Media Library
Path
Enter the path clients use to access the media files on a USB storage device connected to the
Zyxel Device.
Cancel
Click Cancel to restore your previously saved settings.
Apply Click Apply to save your changes.
To Next Page
Loading...
