Chapter 23 Voice
VMG/XMG Series User’s Guide
317
3 Client device A then sends the call invitation to client device C.
Figure 206 SIP Redirect Server
SIP Register Server
A SIP register server maintains a database of SIP identity-to-IP address (or domain name) mapping. The
register server checks your user name and password when you register.
RTP
When you make a VoIP call using SIP, the RTP (Real time Transport Protocol) is used to handle voice data
transfer. See RFC 1889 for details on RTP.
Pulse Code Modulation
Pulse Code Modulation (PCM) measures analog signal amplitudes at regular time intervals and converts
them into bits.
SIP Call Progression
The following figure displays the basic steps in the setup and tear down of a SIP call. A calls B.
Table 130 SIP Call Progression
A B
1. INVITE
2. Ringing
3. OK
4. ACK
5.Dialogue (voice traffic)
To Next Page
Loading...
