Chapter 1 Introducing the Zyxel Device
VMG/XMG Series User’s Guide
38
Internet Green On The Zyxel Device has an IP connection but no traffic.
Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the DSL
connection is up.
Blinking The Zyxel Device is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged mode.
Red On The Zyxel Device attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
WAN Green On The Zyxel Device has a successful 10/100/1000 Mbps Ethernet connection
on the WAN.
Blinking The Zyxel Device is sending or receiving data to/from the WAN at 10/100/
1000 Mbps.
Off There is no Ethernet connection on the WAN.
LAN1~4 Green On The Zyxel Device has a successful 10/100/1000 Mbps Ethernet connection
with a device on the Local Area Network (LAN).
Blinking The Zyxel Device is sending or receiving data to/from the LAN at 10/100/
1000 Mbps.
Off The Zyxel Device does not have an Ethernet connection with the LAN.
2.4G WLAN/
WPS
Green On The 2.4 GHz wireless network is activated.
Blinking The Zyxel Device is communicating with 2.4 GHz wireless clients.
Amber Blinking The Zyxel Device is setting up a WPS connection with a 2.4 GHz wireless
client.
Off The 2.4 GHz wireless network is not activated.
5G WLAN/
WPS
Green On The 5 GHz wireless network is activated.
Blinking The Zyxel Device is communicating with 5 GHz wireless clients.
Amber Blinking The Zyxel Device is setting up a WPS connection with a 5 GHz wireless client.
Off The 5 GHz wireless network is not activated.
USB Green On The Zyxel Device recognizes a USB connection through the USB slot.
Blinking The Zyxel Device is sending/receiving data to/from the USB device
connected to it.
Off The Zyxel Device does not detect a USB connection through the USB slot.
Table 9 XMG3927-B50A/VMG3625-T50A/VMG3927-BX0A/VMG8825-BX0A LED Descriptions
LED COLOR STATUS DESCRIPTION
POWER Blue On The Zyxel Device is receiving power and ready for use.
Blinking The Zyxel Device is self-testing.
Red On The Zyxel Device detected an error while self-testing, or there is a device
malfunction.
Blinking The Zyxel Device is uploading firmware.
Off The Zyxel Device is not receiving power.
Table 8 VMG3925-B10C LED Descriptions (continued)
LED COLOR STATUS DESCRIPTION
To Next Page
Loading...
