Chapter 1 Introducing the Zyxel Device
VMG/XMG Series User’s Guide
44
Table 14 VMG8825-BX0B/BX0C LED Descriptions
Internet Green On Your device has a WAN IP address (either static or assigned by a DHCP
server), PPP negotiation was successfully completed (if used) and the DSL
connection is up.
Blinking The Zyxel Device is sending or receiving IP traffic.
Off There is no Internet connection or the gateway is in bridged mode.
Red On The Zyxel Device attempted to make an IP connection but failed. Possible
causes are no response from a DHCP server, no PPPoE response, PPPoE
authentication failed.
2.4G WLAN Green On The 2.4 GHz wireless network is activated.
Blinking The Zyxel Device is communicating with 2.4 GHz wireless clients.
Off The 2.4 GHz wireless network is not activated.
5G WLAN Green On The 5 GHz wireless network is activated.
Blinking The Zyxel Device is communicating with 5 GHz wireless clients.
Off The 5 GHz wireless network is not activated.
WPS Amber Blinking The Zyxel Device is setting up a WPS connection with a wireless client.
LAN1~4 Green On The Zyxel Device has a successful 10/100/1000 Mbps Ethernet connection
with a device on the Local Area Network (LAN).
Blinking The Zyxel Device is sending or receiving data to/from the LAN at 10/100/
1000 Mbps.
Off The Zyxel Device does not have an Ethernet connection with the LAN.
Phone Green On A SIP account is registered for at least one phone port.
Blinking A telephone connected to one of the phone port has its receiver off the
hook or there is an incoming call.
Amber On A SIP account is registered for the phone port and there is a voice message
in the corresponding SIP account.
Blinking A telephone connected to the phone port has its receiver off the hook and
there is a voice message in the corresponding SIP account.
Off The phone port does not have a SIP account registered.
VMG8623-T50A LED Descriptions
LED COLOR STATUS DESCRIPTION
Power Green On The Zyxel Device is receiving power and ready for use.
Blinking The Zyxel Device is self-testing.
Red On The Zyxel Device detected an error while self-testing, or there is a device
malfunction.
Blinking The Zyxel Device is upgrading firmware.
Off The Zyxel Device is not receiving power.
Table 13 VMG8825-T50 LED Descriptions (continued)
LED COLOR STATUS DESCRIPTION
To Next Page
Loading...
