EasyManua.ls Logo

ZyXEL Communications ZYWALL 5 - Configuring WAN Setup; Ethernet Encapsulation; Figure 44 WAN: Ethernet Encapsulation

ZyXEL Communications ZYWALL 5
668 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ZyWALL 5 User’s Guide
124 Chapter 7 WAN Screens
7.4 Configuring WAN Setup
To change your ZyWALL's WAN ISP, IP and MAC settings, click WA N, then the WAN tab.
The screen differs by the encapsulation.
Note: The warning message "Warning! No NAT rule configured in system" appears in
the status bar when NAT is set to use Full Feature address mapping rules, but
there are no NAT address mapping rules configured.
7.4.1 Ethernet Encapsulation
The screen shown next is for Ethernet encapsulation.
Figure 44 WAN: Ethernet Encapsulation

Table of Contents

Other manuals for ZyXEL Communications ZYWALL 5

Related product manuals