ZyWALL 5 User’s Guide
Chapter 16 Authentication Server 279
The following table describes the labels in this screen.
16.5 Configuring RADIUS
Use RADIUS to authenticate users using an external server.
Click AUTH SERVER, then the RADIUS tab to open the following screen where you can set
up your ZyWALL’s RADIUS server settings.
Figure 134 RADIUS
Table 89 Local User Database
LABEL DESCRIPTION
Active Select this check box to enable the user profile.
User Name Enter the user name of the user profile.
Password Enter a password up to 31 characters long for this user profile.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
To Next Page
Loading...
