ZyWALL 5 User’s Guide
Chapter 21 Remote Management 329
CHAPTER 21
Remote Management
This chapter provides information on the Remote Management screens.
21.1 Remote Management Overview
Remote management allows you to determine which services/protocols can access which
ZyWALL interface (if any) from which computers.
Note: When you configure remote management to allow management from the WAN,
you still need to configure a firewall rule to allow access. See
Chapter 10 on
page 163 for details on configuring firewall rules.
You may manage your ZyWALL from a remote location via:
Note: When you choose WAN only or ALL (LAN & WAN& DMZ), you still need to
configure a firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The ZyWALL
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Console port
2 SSH
3 Telnet
4 HTTPS and HTTP
21.1.1 Remote Management Limitations
1 Remote management over LAN or WAN will not work when:
• Internet (WAN only) • ALL (LAN&WAN&DMZ)
• LAN only, •DMZ only,
• Neither (Disable).
To Next Page
Loading...
