ZyWALL 5 User’s Guide
428 Chapter 30 DMZ Setup
30.3.1 IP Address
From the main menu, enter 5 to open Menu 5 - DMZ Setup to configure TCP/IP (RFC 1155).
Figure 241 Menu 5: TCP/IP Setup
From menu 5, select the submenu option 2. TCP/IP Setup and press [ENTER]. The screen
now displays
Menu 5.2 - TCP/IP Setup, as shown next.
Figure 242 Menu 5.2: TCP/IP Setup
The TCP/IP setup fields are the same as the ones in Menu 3.2 - TCP/IP Ethernet Setup.
Each public server will need a unique IP address. Refer to
Section 28.4 on page 416 for
information on how to configure these fields.
Note: DMZ and LAN IP addresses must be on separate subnets. You must also
configure NAT for the DMZ port (see
Chapter 33 on page 443) in menus 15.1
and 15.2.
30.3.2 IP Alias Setup
You must use menu 5.2 to configure the first network. Move the cursor to the Edit IP Alias
field, press [SPACE BAR] to choose Yes and press [ENTER] to configure the second and
third network.
Pressing [ENTER] opens Menu 5.2.1 - IP Alias Setup, as shown next.
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP Setup
Enter Menu Selection Number:
Menu 5.2 - TCP/IP Ethernet Setup
TCP/IP Setup:
IP Address= 0.0.0.0
IP Subnet Mask= 0.0.0.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
Press ENTER to Confirm or ESC to Cancel:
To Next Page
Loading...
