ZyWALL 5 User’s Guide
Chapter 3 Wizard Setup 71
3.2.1.2 PPPoE Encapsulation
Point-to-Point Protocol over Ethernet (PPPoE) functions as a dial-up connection. PPPoE is an
IETF (Internet Engineering Task Force) draft standard specifying how a host personal
computer interacts with a broadband modem (for example xDSL, cable, wireless, etc.) to
achieve access to high-speed data networks. It preserves the existing Microsoft Dial-Up
Networking experience and requires no new learning or procedures.
Refer to Appendix D on page 563 for more information on PPPoE.
Figure 13 ISP Parameters : PPPoE Encapsulation
First DNS Server
Second DNS
Server
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers. If you do not
configure a DNS server, you must know the IP address of a machine in order to
access it.
Finish Click Finish to complete and save the wizard setup.
Table 9 ISP Parameters : Ethernet Encapsulation
LABEL DESCRIPTION
To Next Page
Loading...
