ZyWALL 5 User’s Guide
Chapter 11 Content Filtering Screens 195
11.5 Customization
You can create a list of good (allowed) web site addresses and a list of bad (blocked) web site
addresses on the ZyWALL. You can also block web sites based on whether the web site’s
address contains a keyword. To add or remove specific sites or keywords from the filter list on
your ZyWALL, click CONTENT FILTER, then the Customization tab. The screen appears
as shown.
Register Click Register to go to a web site where you can register for category-
based content filtering (using an external database). You can use a trial
application or register your iCard’s PIN. Refer to the web site’s on-line
help for details.
Note: The web site displays a registration successful web
page. It may take up to another ten minutes for
content filtering to be activated. See
Section 12.7 on
page 210 for how to check the content filtering
activation.
You can manage your registration status or view content filtering reports
after you register this device.
Note: You cannot access the web site if you have enabled
content filtering in the Content Filtering General
screen and blocked access to web pages that use
Java.
Apply Click Apply to save your changes back to the ZyWALL.
Reset Click Reset to begin configuring this screen afresh.
Table 57 Content Filter : Categories (continued)
LABEL DESCRIPTION
To Next Page
Loading...
