ZyWALL 5 User’s Guide
374 Chapter 24 Maintenance
24.5 Configuring Time and Date
To change your ZyWALL’s time and date, click MAINTENANCE, then the Time and Date
tab. The screen appears as shown. Use this screen to configure the ZyWALL’s time based on
your local time zone.
Figure 195 Time and Date
ntp.cs.strath.ac.uk
ntp1.sp.se
time1.stupi.se
tick.stdtime.gov.tw
tock.stdtime.gov.tw
time.stdtime.gov.tw
Table 137 Default Time Servers