ZyWALL 5 User’s Guide
Chapter 30 DMZ Setup 427
CHAPTER 30
DMZ Setup
This chapter describes how to configure the ZyWALL’s DMZ using Menu 5 - DMZ Setup.
30.1 Configuring DMZ Setup
From the main menu, enter 5 to open Menu 5 – DMZ Setup.
Figure 239 Menu 5: DMZ Setup
30.2 DMZ Port Filter Setup
This menu allows you to specify the filter sets that you wish to apply to your public server(s)
traffic.
Figure 240 Menu 5.1: DMZ Port Filter Setup
30.3 TCP/IP Setup
For more detailed information about RIP setup, IP Multicast and IP alias, please refer to
Chapter 4 on page 85.
Menu 5 - DMZ Setup
1. DMZ Port Filter Setup
2. TCP/IP Setup
Enter Menu Selection Number:
Menu 5.1 - DMZ Port Filter Setup
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Press ENTER to Confirm or ESC to Cancel:
To Next Page
Loading...
