ZyXEL Communications ZYWALL 5 - Figure 70 Rule Summary

ZyWALL 5 User’s Guide
Chapter 10 Firewall Screens 175
1 Click the FIREWALL link and then the Rule Summary tab. Select WA N t o L A N from
the Packet Direction drop-down list box.
Figure 70 Rule Summary
2 In the Rule Summary screen, type the index number for where you want to put the rule.
For example, if you type 6, your new rule becomes number 6 and the previous rule 6 (if
there is one) becomes rule 7.
3 Click Insert to display the firewall rule configuration screen.
4 Select Any in the Destination Address box and then click Delete.
5 Configure the destination address screen as follows and click Add.