ZyWALL 5 User’s Guide
Chapter 15 Certificates 275
The following table describes the labels in this screen.
15.17 Add or Edit a Directory Server
Click CERTIFICATES, Directory Servers to open the Directory Servers screen. Click
Add (or the details icon) to open the following screen. Use this screen to configure
information about a directory server that the ZyWALL can access.
Figure 132 Directory Server Add
Table 87 Directory Servers
LABEL DESCRIPTION
PKI Storage Space
in Use
This bar displays the percentage of the ZyWALL’s PKI storage space that is
currently in use. The bar turns from green to red when the maximum is being
approached. When the bar is red, you should consider deleting expired or
unnecessary certificates before adding more certificates.
# The index number of the directory server. The servers are listed in alphabetical
order.
Name This field displays the name used to identify this directory server.
Address This field displays the IP address or domain name of the directory server.
Port This field displays the port number that the directory server uses.
Protocol This field displays the protocol that the directory server uses.
Modify Click the details icon to open a screen where you can change the information
about the directory server.
Click the delete icon to remove the directory server entry. A window displays
asking you to confirm that you want to delete the directory server. Note that
subsequent certificates move up by one when you take this action.
Add Click Add to open a screen where you can configure information about a directory
server so that the ZyWALL can access it.
To Next Page
Loading...
