EasyManua.ls Logo

ZyXEL Communications ZYWALL 5 - Back to Factory Defaults; Restart Screen; Figure 208 Configuration Upload Error; Figure 209 Reset Warning Message

ZyXEL Communications ZYWALL 5
668 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
ZyWALL 5 User’s Guide
386 Chapter 24 Maintenance
Figure 208 Configuration Upload Error
24.10.3 Back to Factory Defaults
Pressing the Reset button in this section clears all user-entered configuration information and
returns the ZyWALL to its factory defaults as shown on the screen. The following warning
screen will appear.
Figure 209 Reset Warning Message
You can also press the RESET button on the rear panel to reset the factory defaults of your
ZyWALL. Refer to
Section 2.3 on page 56 for more information on the RESET button.
24.11 Restart Screen
System restart allows you to reboot the ZyWALL without turning the power off.
Click MAINTENANCE, and then Restart. Click Restart to have the ZyWALL reboot. This
does not affect the ZyWALL's configuration.

Table of Contents

Other manuals for ZyXEL Communications ZYWALL 5

Related product manuals