ZyWALL 5 User’s Guide
Chapter 20 DNS 321
Figure 157 System DNS: Add Address Record
The following table describes the labels in this screen.
20.6.2 Inserting a Name Server record
Click Insert in the System screen to insert a name server record.
Table 113 System DNS: Add Address Record
LABEL DESCRIPTION
FQDN Type a fully qualified domain name (FQDN) of a server. An FQDN starts with a
host name and continues all the way up to the top-level domain name. For
example, www.zyxel.com.tw is a fully qualified domain name, where “www” is the
host, “zyxel” is the second-level domain, and “com.tw” is the top level domain.
IP Address If this entry is for the WAN port, select WAN Interface.
For entries that are not for the WAN port, select Custom and enter the IP address
of the host in dotted decimal notation.
Enable Wildcard Select the check box to enable DNS wildcard.
Apply Click Apply to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving.
To Next Page
Loading...
