ZyWALL 5 User’s Guide
Chapter 40 Remote Management 515
CHAPTER 40
Remote Management
This chapter covers remote management found in SMT menu 24.11.
40.1 Remote Management
Remote management allows you to determine which services/protocols can access which
ZyWALL interface (if any) from which computers.
You may manage your ZyWALL from a remote location via:
Note: When you Choose WAN only or ALL (LAN & WAN&DMZ), you still need to
configure a firewall rule to allow access.
To disable remote management of a service, select Disable in the corresponding Server
Access field.
Enter 11 from menu 24 to bring up Menu 24.11 - Remote Management Control.
• Internet (WAN only) • ALL (LAN, WAN and DMZ)
• LAN only • Neither (Disable)
•DMZ only