ZyXEL Communications ZYWALL 5 - 19.5 Subnet-based Bandwidth Management; 19.6 Application and Subnet-based Bandwidth Management

ZyWALL 5 User’s Guide
300 Chapter 18 Static Route
Metric Metric represents the “cost” of transmission for routing purposes. IP routing uses
hop count as the measurement of cost, with a minimum of 1 for directly connected
networks. Enter a number that approximates the cost for this link. The number need
not be precise, but it must be between 1 and 15. In practice, 2 or 3 is usually a good
number.
Private This parameter determines if the ZyWALL will include this route to a remote node in
its RIP broadcasts.
Select this check box to keep this route private and not included in RIP broadcasts.
Clear this check box to propagate this route to other hosts through RIP broadcasts.
Apply Click Apply to save your changes back to the ZyWALL.
Cancel Click Cancel to exit this screen without saving.
Table 100 Edit IP Static Route
LABEL DESCRIPTION