2gig Technologies EDGE Installation Guide

Installation Guide for the 2GIG EDGE Security Panel
32
Glass Break
To program the built-in Glass Break sensor, adjust the following
settings.
Sensor
1. Tap Glass Break.
2. Choose Enabled or Disabled.
3. Tap  to move to the next option.
Voice Descriptor
1. Highlight Voice Descriptor.
2. Tap Edit Voice Descriptor to reveal the keypad.
3. Use the keypad to enter the rst few letters of the desired word.
4. Tap the matching word above the keypad.
5. Repeat the steps above to enter a phrase.
6. Tap Done.
7. Review the voice descriptor.
8. Tap  to move to the next option.
Sensor Chime
1. Highlight Sensor Chime.
2. Choose Enabled or Disabled.
3. Tap  to move to the next option.
Smart Areas Assignment
1. Highlight Smart Areas Assignment.
2. Choose a Smart Area (Partition) for the zone.
3. Tap  to move to the next option.
Transmission Delay
1. Highlight Transmission Delay.
2. Choose Enabled or Disabled.
3. Tap  to move to the next option.

2gig Technologies EDGE Specifications

General

Brand	2gig Technologies
Model	EDGE
Category	Security System
Language	English